otto-bock-health-care
Results: 42
Cloud Cushion, The
The Cloud Cushion is a foam wheelchair cushion designed for use by individuals at risk for pressure sores or ulcers. The Cloud Cushion offers protection and stability in a lightweight, low-profile design. It produces acceptable levels of pressure distribution, eliminating the risk of bottoming out and the potential for failures due to punctures or leaks. The cushion corrects to automatically adjust to the dynamic conditions that occur within the seating environment. The Lycra Cel-Pak is install
Procontour Comfort Cushion
The ProContour ComforT is an air floatation seat cushion designed for use by individuals with severe physical, mobility, or lower extremity disabilities, pressure sores and/or ulcers, and spinal cord injuries. The cushion reduces seat interface temperature, helping to avoid tissue maceration, and pressure sores. As the individual seated on the cushion moves, the cushion adjusts itself to eliminate pressure peaks and provide even, stable support. The seat absorbs excess heat from the user, thus
Otto-Bock Changing Table
The Otto-Bock Changing Table is a wall mounted changing table designed for use with children with mobility or severe physical disabilities. The frame of this stretcher-style changing table is covered with HT material. It mounts to the wall and is supported by two self-locking legs. The unit folds up or down against the wall when not in use, and a wall clamp is included to secure it when folded up against the wall. COLOR: The frame is dark brown, and the table is white.
Shower Stretcher / Changing Table
The Otto-Bock Shower Stretcher / Changing Table is a wall-mounted shower stretcher and changing table designed for use by individuals with mobility or severe physical disabilities. The frame is covered with HT material. Features include an adjustable backrest, wall mounting, and two self-locking legs for support. The unit folds up or down against the wall when not in use, and a wall clamp is included to secure it when folded up against the wall. A plastic water receiver with a flexible drain is
Lindio Floor Mounted Soft Showerseat
The Lindio Floor Mounted Soft Showerseat is a shower seat designed for use by individuals with mobility disabilities. This chair is afixed to a floor-mounted console post and features a contoured, padded seat; a covered backrest; and flip-up armrests. The higed seat folds up to conserve space when not in use. COLOR: The frame and post are available in yellow, red, green, blue, black, grey, white, or ivory.
Aquanaut (Model 180-00)
The Aquanaut, model 180-00, is a molded elevated toilet seat and back support designed for use by children who require extra support while toileting. This children's toilet seat supports children in a forward-leaning posture that promotes relaxation and helps them to function on the toilet. It has a contoured sitting surface which provides support for the hips and thighs and a child-sized opening which is narrower in front and wider in the back for ease in hygiene. The unit also includes a remov
Adjustable Back
The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting
Interface Hardware (Models 442F2 & 442F1)
The Interface Hardware, models 442F2 and 442F1, is seating hardware designed to allow mounting of Otto Bock seating systems into Maclaren or Pogon strollers or wheelchairs ranging from 10 to 18 inches wide. A spring-loaded plunger mechanism allows quick removal of the seat for transfer into another base or for transporting. Custom interfaces are available to accommodate mounting systems on most power bases and scooters.
Bolster Thoracic Supports
The Bolster Thoracic Supports are straight lateral trunk supports designed for use in conjunction with the Otto Bock MOSS II seating systems (see separate entries). Two sizes of polyurethane foam pads ($20 to $18) slide over straight or 1 or 2 inch offset metal fixtures which mount to the sides of aluminum channel back frames ($29.25). They are adjustable vertically. They are available with strap kits which attach with velcro or buckle closures to the front of pads for anterior trunk support. CO
Seat Belt Kit
The Seat Belt Kit is a wheelchair seatbelt designed for use with the Otto Bock MOSS II seating systems (see separate entries). The kit consists of webbing with a plastic side-release or push button-style buckle. DIMENSIONS: 1.5 and 2 inch widths.
Drop Seat Base And Hardware
The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.
Moss Lap Tray
The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.
Bts / Sts Custom Fixtures & Bending Tool
The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut. The bending tool may be clamped in a vice and used to shape the rods.
Web Seat Frame
The Web Seat Frame is a detachable seat frame with elastic webbing that can be substituted for sling upholstery in a 16 or 18 inch wide wheelchair. The Frame is easily removed for folding the chair. It supports a variety of polyurethane integral skin foam cushions, which clip onto the frame and remove for cleaning.
Ball Ratchet Set
The Ball Ratchet Set is a seating hardware allowing angle adjustment in 5 degree increments. It is made of cast and heat treated alloy steel. It can be bolted or welded inside 7/8 inch diameter by 18 gauge round tubing. The Set is useful for legrests, seat to back attachments, and other seating applications. It is available in chromed or unchromed.
Footrest Receptacle And Pads
The Footrest Receptacle and Pads is a foot support made of a vacuum formed plastic shell covered with molded foam, and mounts to a standard wheelchair footrest or Otto Bock Fullcare Orthotic Seating or MOSS II systems. Each footrest receptacle ($83.75) and pad ($50.25) is ordered separately. DIMENSIONS (HxWxL): Large is 13 x 10 x 6 inches; Medium is 10 x 10 x 5 inches (outside dimensions). COLOR: Black and grey.
Head Rest Supports (Models 430C1, 430C2, 430H1, 430H10, 430N1 Series)
The Head Rest Supports are headrests and neckrests made from molded, contoured foam, and reinforced with flexible steel. They are available in large headrest, small headrest, combination headrest and neckrest, large neckrest, small neckrest, and lateral control. They can be modified as needed by bending the steel insert to the desired shape.
Headrest / Neckrest Hardware: Hardback Headrest Hardware (Models 430F7, 430F2, 430F6, & 430F5) & Sling Back Hardware (Model 446K1)
The Headrest and Neckrest Hardware, consisting of Hardback Headrest Hardware and the Sling Back Hardware, is a support system designed to attach Otto Bock headrests and neckrests to the back of a wheelchair. Model 430F7 has two ball joints for multi directional adjustability, including horizontal and vertical planes, for hard or rigid seat backs. Model 446K1 has attachment hardware for wheelchair frame of sling backs.
Channel Armrest Fixture (Model 436F1)
The Channel Armrest Fixture, model 436F1, is a pivoting, elevating armrest designed to be attached to the arm of a wheelchair with a fitted clamp. The swivel configuration allows the armrest to turn on its horizontal and vertical axis for more comfortable positioning. It can also be used to mount and position hand control units for powered wheelchairs.
Armrest Cushions (Models 436A4 & 436A5 Series) & Channel Armrest (Models 436A2 & 436A3)
The Armrest Cushions, models 436A4 and 436A4 series ($63 to $21), and the Channel Armrest, models 436A2 and 436A3 ($35 to $32), consist of steel reinforced armrests, injection molded with self skinning foam. Straight armrests, and desk or full length sizes are molded to cradle the arm for support. The Channel interchangeable armrest is molded to cradle the elbow and arm with several different hand pads available. The Cushions can be mounted directly to standard wheelchair arms or used with the 4
Legrest Pad (Models 440P1 & 440P2)
The Legrest Pad is an injection molded, steel reinforced calf trough with foam padding. It has an elliptical shape, curved to fit the natural contour of the leg. It attaches to the footrest support with fitted clamps. Adapter plates are available for some makes of wheelchairs. These can be used with Side Thoracic Support hardware.
Side Thoracic Support And Hardware (Models 434P1, 434F1, 434F2, & 434F3)
The Side Thoracic Support and Hardware is a trunk support pad with mounting hardware for either lateral or side support designed for wheelchair users. An extruded aluminum clamp attaches to the back frame of the wheelchair. It has a passive locking system which may be disengaged, and allows the pad to swing away for easy transfer. Contoured support pads are injection molded foam with semi-flexible steel reinforcement, and can be shaped as needed. Hardware may be ordered for the left or right sid
Modular Seat And Back Cushions
The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.
Sternal Support System
The Sternal Support System consists of sternal support pads, available in two sizes for children and two sizes for adults. They are made of self-skinning urethane foam. The small and medium sizes are a broad flat pad, the intermediate and large sizes is extended into an X configuration. The harness strap attaches four corners of the pads to the four corners of the back of the wheelchair. The strap kit is $13 to $8.75; the pads are $30.50. DIMENSIONS (WxH): The Child size is 6 x 3.781 inches; Sma
Skippi & Skippi Plus
The Skippi and Skippi Plus are child's powered wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury. Adjustable and designed to grow with the child, it has multiple configuration options, and it was design to have a low profile and be compact and maneuverable. FRAME (WxL): 22.4 x 27.6 (without leg rests) or 33.5 (with leg rests) inches. It has a turning radius of 21.7 inches, and the ground clearance is 66 m
Eco-Buggy (Model 3210)
The Eco-Buggy, model 3210, is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities who are able to remain upright without upper-body positioning aids. FRAME (HxLxW): 11.5 x 45 x 16.5 inches when folded. The frame is powder-coated aluminum with a snap-on under-frame storage bag. SEAT (LxW): 11.8 x 13.75 inches. The seat depth can be adjusted from 11.8 to 14 inches to accommodate growth. The backrest reclines and has a height of 21 5/8 inches. A pel
Kimba Pediatric Tilt-In-Space Mobility System
The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated
Lisa Pediatric Postural Mobility System (Models 3207 & 3208)
The Lisa Pediatric Postural Mobility System is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Model 3207 is 13 x 41 x 11 inches when folded; model 3208 is 17 x 42 x 16 inches when folded. The frame is Saturn Blue Metallic. SEAT (LxW): Model 3207 is 10, 12, or 14 x 12 inches without upholstery and model 3208 is 12, 14, or 16 x 14 inches without upholstery. Upholstery adds two inches to width. The seat width may be reduced using
Quicklift Ii
Quicklift II is a pediatric hydraulic bath lift designed for use by caregivers of children with lower extremity, neurological, or severe physical disabilities. It is a portable, lightweight lifting device that helps caregivers lower and lift a child in and out of the bathtub. To use the device, it is placed in the tub, where suction cups hold it in place while a hydraulic cylinder raises and lowers the frame. It accommodates the Robby bathing support (see separate entry). The lift has a growth-a
Robby Bathing Support
Robby Bathing Support is a child's bath support designed for use by children with neurological and severe physical disabilities. The frame is made of telescoping tubes that allow the hip, knee, neck, and head support areas to be adjusted separately to accommodate various sitting and lying positions. The seat area and back length can be adjusted as the child grows. The upper mesh section can be removed for hair washing. Lower leg positioning straps are included. OPTIONS: Robby Trunk Belt for addi
Sherpa Tilt-In-Space Mobility Base
The Sherpa Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair base designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 25.5 inches with backrest folded down x 19 inches without footrests (29.5 inches with footrests) x seat width + 7 inches. The powder-coated aluminum frame has a 50-degree tilt range. A built-in scale enables replication of the exact angle of tilt. Other features include height-adjustable
Paragolfer
The ParaGolfer is a powered standup wheelchair designed to enable people with mobility and lower extremity disabilities and spinal cord injury to play golf. This all-terrain powered chair features both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about while either in a seated or standing position. The ParaGolfer also can be used for other sports that require standing (such as archery or
C-Leg (Model 3C100)
The C-Leg, model 3C100, is a microprocessor-controlled prosthetic knee designed for use by individuals with lower extremity amputation. For stability, the knee's microprocessors control the knee's hydraulic function 50 times a second. The maxium flexion angle is 125 degrees. The knee is available in standard and knee-disarticulation versions. OPTIONS: Feet approved for use with the C-Leg are models 1D25, 1A30, and 1D10; C-Walk (model 1C40); LuXon Max (model 1E40); Lo Rider (mode 1E57); and the L
Axtion Foot (Model 1E56)
The Axtion Foot, model 1E56, is a prosthetic foot designed for use by individuals with lower extremity amputation. Made from urethane and carbon, it is a lightweight high function foot for active users. Features include a dynamic heel, a pyramid with an integrated elastomer wedge, and a long carbon fiber toe lever. SIZES: 22 to 31. DIMENSIONS: Profile is 2 1/8 inches. The heel is 0.5-inch high. CAPACITY: 275 pounds. WEIGHT: 13 ounces. WARRANTY: 36 months.
3R80 Prosthetic Knee
The 3R80 Prosthetic Knee is a knee prosthesis designed for use by individuals with lower extremity amputation. This knee's rotary hydraulic responds to ground reaction forces during the stance phase of gait. It utilizes a high hydraulic resistance to prevent involuntary flexion of the knee. This stance phase control is advantageous on uneven surfaces, slopes, and when walking down stairs. The knee has four optimized adjustment options for stance phase and swing phase control. Flexion and extensi
Busy Bee Pediatric Postural Walker (Models 2413, 2423, & 2433)
The Busy Bee Pediatric Postural Walker is an adjustable child's walker designed for use by children with lower extremity, mobility, neurological, or walking disabilities. This lightweight walker encourages active postural control during standing and walking. Its torsional stiffness provides objective and and subjective stability. The walker is equipped with height-adjustable handles and solid rubber wheels for indoor and outdoor use. Noise-free external locks on the rear wheels prevent inadverta
Otto Bock Electric Wrist Rotator (Model 10S17)
The Otto Bock Electric Wrist Rotator, model 10S17, is an electronic wrist rotator designed for use by individuals with upper extremity amputation. This device provides electrical rotation of the Otto Bock System Electric Hand or Greifer. The 6- or 7.2-volt device is controlled electrically with the model 13E205 MyoRotronic controller (see separate entry).
Transcarpal Hand Dmc Plus (Model 8E44)
The Transcarpal Hand DMC (Dynamic Mode Control) Plus, model 8E44, is a myoelectric prosthetic hand designed for use by individuals with upper extremity disabilities. Grip speed is variable from 15 to 130 millimeters per second. The high maximum grip speed and the balance of grip force and speed allow the user to experience more physiological gripping. The control contains both the original DMC control and the DMC plus mode, which includes a virtual hand switch. After gripping once with maximum g
Otto Bock Myorotronic (Model 13E205)
The Otto Bock MyoRotronic, model 13E205, is a myoelectronic wrist controller designed for use by individuals with upper extremity amputation. This device is for electrical control of the model 10S17 Electric Wrist Rotator with 13E183 Buzzer. It enables electrical pronation and supination as well as opening and closing of the hand with one or two 13E200/13E202/13E68 MyoBock Electrodes or a combination of one 13E200/13E202 Electrode and a 9X50/9X52 Linear Transducer. The unit has five different pr
Sensorhand Speed
SensorHand Speed is a myoelectric prosthetic hand designed for use by individuals with upper extremity amputation. The hand can be opened and closed at speeds from 15 to 300 millimeters per second. To keep held objects from slipping, an AutoGrasp feature monitors the hand's grip force and changes the grip as needed. AutoGrasp can also be turned off. The hand comes with either a Lamination Ring or a Quick Disconnect Wrist for terminal device changes. A slip-clutch allows the user to release the h
Myoboy (Model 757M11)
MyoBoy, model 757M11, is an assessment and training system designed for use by individuals with upper extremity amputation who are being fitted for an Otto Bock myoelectric prosthetic hand (see entry). The system enables a prosthetist to conduct realistic tests of muscle tension and gather data that can be used to adjust the electrodes on the myoelectric hand. The system documents the individual's muscle signal strength so the prosthetist can track results and print data sheets. The included My
Flip2Sit
The Flip2Sit is a youth positioning chair designed for use by children with neurological or physical disabilities. This chair provides stable support while the child is sitting at the table and as a positioning seat for play once the removable back is detached and the chair is flipped over. The contoured latex-free seat is designed to help improve posture, sitting balance, and other functional abilities. Features include a two-way belt for extra hip stability, anti-slip pads to reduce movement,